Car Dent Repair Tools Puller Paintless Furniture Body Hail Damage Fix Bridge Pulling Instrument Adhesive Tabs Removal Hand Tools
DIY Dent & Ding Repair kit is used to easily remove small dings and dents from the body of your car without risking damage to the paint .This kit be used for any small dent or ding anywhere on the body of your except for angles and borders .
Package Content:7 x Dent Puller Tabs1 x Puller Bridge Stand1 x Knob Nut1 x Plastic Glue Scraper
How to Repair Dents:1.Using a clean cloth, clean the dented area with the release agent. 2.Insert the glue stick into the glue gun, plug in the glue gun and let it warm up for 10-15 minutes before use.(if you do not have a glue gun, we recommend buying one)3.Then apply heated glue from glue gun to the center of the glue. Select one of the Puller tabs according to the dent to be treated, and stick it to the glue.Attention: Keep the puller tab hold firmly for 10 seconds. Do not push excessively the puller tab against the dent.4.Place the puller bridge stand over the puller tab, setting. Adjusters to the desired length. Screw the knob nut slowly, and continue to rotate until the dent is raised. Stop when dent returns to the normal surface level of the car body.5. Lose the knob, and remove the puller bridge stand and puller tab from the treated surface. Use the release agent in an endowment to remove the dried glue from the surface. Then, use the Plastic scraper to peel off the softened glue patch.6. If the glue spot is too large to be removed, use the rubber hammer to lightly tap the leveling pen against the glue, If the dent surface is still noticeable, repeat steps 2-4.